3 Using D-Link DVC-2000 over BGAN
15. Select OK to apply the changes.
16. You maybe prompted to restart the system. Agree to this prompt, if asked.
17. Once back at the Network
menu you can choose to enter DNS if you are using domain names.
This is not necessary if you are only making IP address calls.
15. Select Exit to exit the menu screens
Note the following:
• On the HNS 9201 – If you use an external router, you can use BGAN LaunchPad on a computer
to initiate the connection, which can then be shared by the DVC-2000 to make a call. Router
ports NAT and PAT must be configured to allow inbound video calls from the fixed to mobile
direction. See the documentation supplied with your router for details.
•
On the EXPLORER 500/700 – It is possible to connect the DVC-2000 and a computer to a
hub or switch so that the device’s share a single PDP context. You can use BGAN
LaunchPad on a computer to initiate the connection, which can then be shared by the
i2eye™ to make a call.
• On the EXPLORER 500/700 - For inbound calling or single device deployment, set the terminal
to operate in Modem mode with a static IP address, and configure the DVC-2000 with a DHCP
IP address for both inbound and outbound calling. Once the EXPLORER terminal is connected
to the BGAN network, the terminal will use DHCP to send the network static IP address to the
DVC-2000.
Recommendations
The recommended call rates for the DVC-2000 are as follows:
• BGAN 256k Streaming IP connection – 192k max call rate send/receive on the DVC-2000.
• BGAN 128k Streaming IP connection – 96k max call rate send/receive on the DVC-2000.
NOTE: The DVC-2000 supports call rates of 64k, 96k, 112k, 128k, 192k, 256k, 384k and
512k.
Inmarsat recommends that you use a streaming IP data connection for the DVC-2000. It is possible
to use the Standard IP data connection; however one of the characteristics of this connection is that
the requested data rate is not guaranteed. If you do decide to use a Standard IP connection,
Inmarsat suggests that you select one of the lower call rates of 64k or 96k on the DVC-2000.
NOTE: Remember to close the Streaming IP connection when the call is complete.
Setting up a phone book entry
To set-up a phone book entry for the phone(s) that you wish to connect to:
1. Select Dial followed by Add options to enter a Phone Book Entry.
2. Once on add page you can either enter phone numbers for PSTN calls or IP addresses for IP
video calls
3. Enter a name using the alphanumeric keypad into the Name field.
4. When the name is complete, select the down cursor key to move to the next field.
5. Once the required information has been entered for the contact select OK to save the changes.
6. This entry will now appear in your phonebook when select the Dial option from the main
screen.
7. If you want to manually dial a number you can select the Manual Dial option and enter an IP
address to make a call.
(79 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji