D-Link DWC-1000 Instrukcja Użytkownika Strona 24

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 181
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 23
Wireless Controller User Manual
23
Figure 8: DMZ configuration
In order to configure a DMZ port, the controller configurable port must be set to
DMZ in the Setup > Internet Settings > Configurable Port page.
2.4 Universal Plug and Play (UPnP)
Advanced > Advanced Network > UPnP
Universal Plug and Play (UPnP) is a feature that allows the controller to discovery
devices on the network that can communicate with the controller and allow for auto
configuration. If a network device is detected by UPnP, the controller can open
internal or external ports for the traffic protocol required by that network device.
Once UPnP is enabled, you can configure the controller to detect UPnP-supporting
devices on the LAN (or a configured VLAN). If disabled, the controller will not allow
for automatic device configuration.
Configure the following settings to use UPnP:
Przeglądanie stron 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 180 181

Komentarze do niniejszej Instrukcji

Brak uwag