D-Link DCS-6620 - Network Camera Instrukcja Użytkownika Pobierz pdf (Strona 130)

130

DCS-6620 User’s Manual

D-Link Systems, Inc.

Reset and Restore

There is a button hidden in the pinhole beside the Ethernet socket. It is used to reset

the system or restore the factory default settings. Sometimes resetting the DCS-6620

will return the system back to a normal state. If the system still has problems after

reset, restore the factory settings and install again:

RESET: 1.

RESTORE: 1.

Reset and Restore

Restoring the factory defaults will result in the

loss of any previous settings and will require

running the Installation Wizard to return the

DCS-6620 to a normal state.

The LED on the front of the camera will begin blinking red and

green.

Lightly insert a paper clip (or a similar sized tool) into the reset

hole on the back of the camera, press lightly and then release

the button.

Insert the paperclip or other tool and press on the button

continuously.

Wait for the LED on the front of the camera to blink red and green

and hold the button for 10 seconds.

Withdraw the tool after the second cycle of the LED blinking and

a factory restore has been completed.

When the LED stops the blinking the reset has completed.

Reset button

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 142 143

Brak uwag

D-Link DCS-6620 - Network Camera Instrukcja Użytkownika Strona 130